Skip to main content

Aviation glossary

Part-145

Approved maintenance organisations

In short

Part-145 is Annex II to Regulation (EU) No 1321/2014. It sets the approval requirements for organisations maintaining aircraft and aircraft components.

Updated

Definition

Part-145 is Annex II to Regulation (EU) No 1321/2014. It sets out what an organisation must meet to obtain and keep an approval for the maintenance of aircraft and components (145.A.10). The competent authority issues the approval, which defines the scope of work: the aircraft, engines or components covered.

A Part-145 organisation needs suitable facilities, tooling, current maintenance data and qualified staff. Its procedures are set out in the maintenance organisation exposition, the MOE (145.A.70). Since 2 December 2022 it must also run a management system that includes safety risk management (145.A.200), introduced by Implementing Regulation (EU) 2021/1963.

Certifying staff, qualified under Part-66 and authorised by the organisation, sign the certificate of release to service once the work is complete (145.A.50). Complex motor-powered aircraft and aircraft used by licensed air carriers must be maintained by a Part-145 organisation. For other aircraft, a CAO or independent certifying staff may also do the work, depending on the case.

What it means for your organisation

A Part-145 organisation must show that every job followed current maintenance data, that the people who worked and signed were authorised, and that fitted parts came with a valid release certificate. Traceability of work cards, parts and authorisations is central to the authority’s oversight.

The link with the CAMO matters just as much: defects found during a check and ordered work that could not be completed must be reported to it (145.A.50). A clear work order and a complete return prevent missed due items and limitations that never reach operations.

In GEARUP

GEARUP Naviro lets a Part-145 shop prepare and follow work: actions, owners, expected parts and dates stay linked to the aircraft. Closure evidence is kept in the technical history, which the CAMO and operations can consult. The certificate of release to service is still signed by authorised certifying staff.

Frequently asked questions

A CAO (Annex Vd) is a combined organisation limited to other-than-complex aircraft that are not listed on an air carrier’s air operator certificate. It can maintain aircraft and, with the privilege, manage their continuing airworthiness. Part-145 covers maintenance of all aircraft, airliners included.

Certifying staff holding a certification authorisation issued by the organisation, normally based on a Part-66 licence. They sign on behalf of the organisation after verifying that all ordered maintenance has been properly carried out (145.A.50).

Yes. Since 2 December 2022, Implementing Regulation (EU) 2021/1963 has required a management system covering hazard identification, risk management, an internal safety reporting scheme and compliance monitoring (145.A.200 and 145.A.202).

Official sources

This definition simplifies official texts to make them easier to read. It does not replace the applicable regulation or the opinion of your authority.

Demonstration

See how GEARUP handles this topic.

The demonstration starts from your organisation: your workflows, your roles and the documents you use today.