Skip to main content

Aviation glossary

CRS

Certificate of Release to Service

In short

A CRS is the signature that returns an aircraft to service after maintenance, certifying that the ordered work has been properly carried out.

Updated

Definition

A certificate of release to service (CRS) is issued after maintenance on an aircraft. It certifies that the ordered maintenance has been properly carried out and that there is no known non-compliance endangering flight safety.

In a Part-145 organisation, the CRS is signed before flight by authorised certifying staff on behalf of the organisation (145.A.50). For a component maintained off the aircraft, the release takes the form of an EASA Form 1. Under Part-ML, a CRS may be issued by a maintenance organisation, by independent certifying staff or, for limited maintenance, by the pilot-owner (ML.A.801, ML.A.803).

A CRS states at least the work carried out, the completion date, the identity of the organisation or person issuing it and any limitations. If the maintenance could not be completed, a CRS may be issued within the approved aircraft limitations, provided this is recorded (M.A.801, ML.A.801).

What it means for your organisation

No aircraft may be released to service without a CRS (M.A.801). Operations therefore need to know, for each aircraft, whether the last maintenance was certified, with which limitations, and which defects remain deferred. That information usually sits in the technical log.

Common pitfalls: a signature by someone whose authorisation does not cover the type or task, outdated maintenance data, a part fitted without a valid release certificate, or a limitation written on the CRS but never passed to the crew. The CAMO must also be told about defects found and work not carried out (145.A.50).

In GEARUP

GEARUP Naviro keeps completed work, closure evidence and related documents in each aircraft’s history, available to maintenance and operations alike. Naviro does not issue a CRS: the release to service is still signed by authorised certifying staff, following the organisation’s procedures.

Frequently asked questions

A CRS releases an aircraft to service after maintenance. An EASA Form 1 accompanies a component, part or equipment, maintained off the aircraft: it serves as that component’s certificate of release to service (145.A.50).

Yes, for the limited maintenance listed in Appendix II to Part-ML, on an aircraft operated under Part-NCO that they own and for which they hold a valid pilot licence. The CRS is entered in the logbooks with their licence number (ML.A.803).

Yes, within the approved aircraft limitations: the CRS then states that maintenance could not be completed and sets out the limitations that apply. No CRS may be issued with a known non-compliance that endangers flight safety.

Official sources

This definition simplifies official texts to make them easier to read. It does not replace the applicable regulation or the opinion of your authority.

Demonstration

See how GEARUP handles this topic.

The demonstration starts from your organisation: your workflows, your roles and the documents you use today.