Skip to main content

Aviation glossary

Airworthiness Directive

AD

In short

An airworthiness directive (AD) mandates actions on an aircraft, engine or component to correct an unsafe condition. Compliance is mandatory.

Updated

Definition

An airworthiness directive (AD) is a decision by the authority that mandates actions on an aircraft, engine, propeller or component: inspection, replacement, modification or an operating limitation. It is issued to correct an unsafe condition found in a product.

In the European Union, EASA issues ADs for the products whose type design it certifies. For products designed outside the EU, ADs issued by the State of Design, such as FAA ADs, apply from their effective date unless EASA decides otherwise. They are all published in EASA’s Safety Publications Tool, which also lists proposed ADs open for comment.

Regulation (EU) No 1321/2014 requires every applicable AD to be carried out within its requirements (M.A.303, ML.A.303). Repetitive ADs belong in the maintenance programme, and the airworthiness review checks that all applicable ADs have been complied with and recorded. In France, OSAC also publishes ADs issued by the DGAC, in particular for aircraft outside the scope of EU rules.

What it means for your organisation

An AD not complied with on time makes the aircraft unfit to fly. For each aircraft, you need to identify the applicable ADs from the type, serial number, engines, propellers and installed equipment, then track compliance, repetitive due items and the method of compliance chosen.

Common pitfalls: an AD on a piece of equipment is missed because it does not name the aircraft type, a repetitive AD is not carried into the maintenance programme, or a revised AD is overlooked. An AD can also apply to any aircraft on which the affected part could be installed, even if it is not fitted yet.

In GEARUP

GEARUP Naviro lets you track, aircraft by aircraft, repetitive AD due items in hours, cycles or calendar time, and keep evidence of compliance in the technical history. Identifying and assessing applicable ADs remains the job of the CAMO, the CAO or the owner.

Frequently asked questions

Yes. Every applicable AD must be carried out within its requirements, whatever the aircraft is used for, unless EASA specifies otherwise (ML.A.303). Some aircraft under national regimes follow specific rules.

No. A service bulletin is only mandatory when an AD makes it applicable or when it is included in the maintenance programme. Otherwise, the decision to apply it rests with the owner, the operator or the CAMO.

In EASA’s Safety Publications Tool (ad.easa.europa.eu), which brings together EASA ADs and State of Design ADs adopted since 2003. For older French ADs and some national aircraft, the OSAC website is the reference.

Only if the AD explicitly allows it, and within the limits of pilot-owner maintenance under Part-M or Part-ML.

Official sources

This definition simplifies official texts to make them easier to read. It does not replace the applicable regulation or the opinion of your authority.

Demonstration

See how GEARUP handles this topic.

The demonstration starts from your organisation: your workflows, your roles and the documents you use today.